Assembly - Kessel GTF 500 Originalbetriebsanleitung

4.

Assembly

Do not pull or carry the device by the cable!
▶ Hold and carry the pump by the carrying handle.
KESSEL submersible pumps are delivered with a vertical pressure connection
(R 1 1/4"). The enclosed hose adapter can be screwed on for additional connection
variants.
Switching height
Positioning the pump in the pump sump (stationary use)
▶ Position the submersible pump firmly on a level surface.
▶ Heed the switch-on level of the pump. (1)
▶ Take residual water into account. (2)
Deep extraction (option for mobile use):
Proceed as follows to extract water down to a residual level of 20mm:
▶ Screw the intake cage off. ➊
▶ Store the intake cage safely. ➋
▶ Secure the spiral housing (already inserted) using screws. ➌
▶ Position the pump on a level surface.
▶ Hold the float switch manually in the "ON" position until the required level has
been reached.
✓ Extraction starts immediately.
18
ON (1) OFF (2)
160 mm 80 mm
Installation and operating manual
1
2
b
Fig. [3]
3
1
2
Fig. [4]
h
016-084_01