Sony MJ700 Bedienungsanleitung Seite 93

7. Align the three knobs in the cover with the three notches
in the body, and insert the cover into the body.
8. Use a flat-head screwdriver or other tool to press the
knobs of the cover into the notches so that the body cannot
be pulled off.
9. Place an extra soldering on section A to solder the
shielded wires.
10. Align the cable as shown in the figure, and then secure
the cable clamp using pliers or other tool.
Knobs in cover
Notches in body
Body
Cable clamp
A
Cover
Shielded wires
(E) 35