Connecting External Playback Devices (Aux Mode) - Silvercrest SLTR 70 A1 Schnellstartanleitung

Connecting external playback devices (AUX mode)

In AUX mode, you can connect external playback devices such as an MP3
player or a smartphone to use them as the playback source for the speaker .
♦ Ensure that the speaker is switched off .
♦ Connect the external playback device using the 3 .5 mm jack cable
the AUX input
♦ Press and hold the
on . The red LED
LED lights up .
9
♦ Start playback on the external playback device .
♦ Set the desired volume using the
on the speaker . Alternatively, you can increase the volume on the external
playback device .
♦ Press the
button
4
♦ To exit AUX mode, turn off the speaker and remove the 3 .5 mm jack
cable from the AUX input
q
NOTE
► In AUX mode , the speaker switches off automatically after 15 minutes if
no playback is made via an external playback device .
In AUX mode, the Bluetooth
►
possible to use the
the next/previous track .
SLTR 70 A1 / SLTE 70 A1
on the loudspeaker .
6
button
flashes twice and you will hear a beep . Then, the blue
8
button if you want to mute the speaker . Pressing the
4
again briefly will unmute the speaker .
/ button
for about 2 seconds to switch the speaker
5
/ button
on the speaker .
6
® function is deactivated . It is also no longer
or the /
2
or the / button
2
button to jump to
3
GB │ IE
to
q
3
│
29 ■