Switching The Device On / Off; Connecting The Device To A Bluetooth® Playback Device - Silvercrest SBL 3 B2 Bedienungs- Und Sicherheitshinweise

When the battery is drained, a signal will sound every
30 seconds and power LED will flash red. The battery must
be recharged. You can also use the device whilst charging.

Switching the device on / off

Press and hold the
switch the device on and activate the Bluetooth
ascending tone sequence will sound and the power LED will
flash blue.
Press and hold the
to switch the device off and disable the Bluetooth
A descending tone sequence will sound.
Connecting the device to a
Bluetooth
The device must be paired with a compatible Bluetooth
device before use.
Be sure the device is off and the Bluetooth
is on.
Set the Bluetooth
devices. Please refer to the operating instructions from the man-
ufacturer of your Bluetooth
description.
button
1
button
1
playback device
®
playback device to scan for Bluetooth
®
playback device for a detailed
®
for approx. 2 seconds to
®
again for approx. 2 seconds
playback device
®
function. A
function.
®
playback
®
®
GB 15