Use Of The Appliance; Display; Ventilation; Starting-Up And Appliance Management - Küppersbusch KI9820.0SF Bedienungsanweisung Mit Montageanweisungen

USE OF THE APPLIANCE

Display

Display
0
1...9
U
A
E
H
P
L
II

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the heat created by the
electronic system reaches a certain level. The ventilation starts its high speed when the hob is intensively used. The
cooling fan reduces its speed and stops automatically when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent. This may cause blue-
tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a variable electromagnetic field
which produces inductive currents in the ferromagnetic bottom plate of the pan. The result is a heating-up of the pan
located on the heating zone.
Of course the pan has to be suitable:
•
All ferromagnetic pans are recommended (please test to see if it attracts a magnet): cast iron and steel pans,
enamelled pans, stainless-steel pans with ferromagnetic bottoms...
•
NOT suitable: copper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,...
The induction heating zone adapts automatically to the size of the pan. Pans with too small diameter may not work.
This diameter is varying in relationship to the heating zone diameter.
If the pan is not suitable to the induction hob the display will show [ U ].

Sensitive touch

Your induction hob is equipped with electronic controls with sensitive touch keys. When your finger presses the key,
the corresponding command is activated. This activation is validated by a control light, a letter or a number in the
display and/or a "beep" sound.
For normal use, press only one key at any time.
Designation
Zero
Power level
No pan detection
Heat accelerator
Error message
Residual heat
st
1 Booster
nd
2 Booster
Locking
Keep warm
Keep warm
Keep warm
Stop & Go
Grill Function
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
st
The 1 Booster is activated.
nd
The 2 Booster is activated.
Control panel locking.
Maintain automatically at approximately 42°C.
Maintain automatically at approximately 70°C.
Maintain automatically at approximately 94°C.
The hob is in pause.
The Grill Function is activated.
34