Troubleshooting; Disposal / Recycling - HSM ProfiPack C400 Betriebsanleitung

6 Operation
Adjustable limit stop
Lever up:
Lever down:

7 Troubleshooting

Blockage
Press the "Reverse button" to remove mate-
rial in the event of problems.
The cutting unit reverses for approx.

3 sec and pushes the cardboard back.
Note
If a large quantity of cardboard has already
been pulled in before the blockage occur-
red, you can also press the forward button.
This makes the cutting unit run forwards and
shreds the remaining cardboard.
During this function, the "Ready for opera-
tion" and "Blockage" indicators flash alter-
nately.
For all other malfunctions, check whether
the motor was overloaded before contacting
our customer service. Let the machine cool
down for approx. 15 – 20 mins. before re-
starting.
05/2018
For moving
Limit stop fixed
8 Cleaning
Switch off the machine and disconnect the
power plug. When cleaning, only use a soft
cloth and a mild soap-water solution. How-
ever, no water must enter the equipment.

9 Disposal / Recycling

Electrical and electronic old de-
vices contain a variety of valuable
materials, but also hazardous sub-
stances which were required for
function and safety. Incorrect dis-
posal or handling can be danger-
ous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and electron-
ic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
ProfiPack C400
english
11