Panasonic GP-US932CSXE Bedienungsanleitung Seite 25

When the color axis is unclear
When "USER AREA" is selected on the "MATRIX" screen, the axis is automatically displayed by selecting a color on the screen.
Color selection is performed on the color detection screen.
The white rectangle cursor is blinking to select a target color on the color detection screen.
Color detection screen
Cy-B
= Cursor (blinking)
Step 1
Point the camera at the center of the subject with which the
color is detected.
If the camera is immovable, move the rectangle cursor to
the area with the target color by pressing the [g], [h], [e]
and [f] buttons.
Note:
• Every time the [SEL] button is pressed, the size of the
rectangle cursor changes in the order of large →
medium → small.
Select a size to meet the subject size.
Step 2
Hold down the [FREEZE MENU ] button for 2 seconds or
more.
The "MATRIX" screen appears again.
→
[CHROMA GAIN] Adjusts chroma gain
Be sure to view a vector scope or a color video monitor when the chroma gain is adjusted by pressing the [e] or [f] button.
When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–"
direction, the color becomes lighter.
[TOTAL PED] Adjusts the pedestal level
Be sure to view a waveform monitor or a color video monitor when the pedestal level (black signal level) is adjusted by pressing
the [e] or [f] button.
When the level indicator moves in the "+" direction, the image becomes brighter, and when the level indicator moves in the "–"
direction, the image becomes darker.
<Color matrix splitting chart>
* This chart is a guideline for displaying
the closest axis at adjustment.
To perform fine adjustment, adjust "PHASE" (hue) and
"GAIN" (chroma).
For example, the adjustment of "PHASE" or "GAIN" of "Cy/
Cy-B" on the following screen provides the simultaneous
adjustment of "PHASE" or "GAIN" of the adjacent axes "Cy"
and "Cy-B" in the color matrix splitting chart.
R
R-Ye
Ye
Ye-G
G
G-Cy
Step 3
** MATRIX ** USER
Cy/Cy-B PHASE .... ....
|
.... ....
Cy PHASE
|
.... ....
Cy-B PHASE
|
Cy/Cy-B GAIN .... ....
|
.... ....
Cy GAIN
|
.... ....
Cy-B GAIN
|
USER AREA *
RET END
Note:
• When the color on the axis in the color matrix splitting
chart is detected, the adjacent axes are not displayed.
Mg-R
Mg
B-Mg
B
Cy-B
Cy
0
0
0
0
0
0
25