Panasonic GP-US932CSXE Bedienungsanleitung Seite 10

Gain selection button [GAIN]
y
Selects the gain from OFF, LOW and HIGH.
Selection of a gain turns on the green indicator of the
selected gain. No indicator is turned on when the gain is
set to off.
Selectable gain varies depending on the setting in the
SETUP menu (☞ page 21).
When "AUTO" is selected for "GAIN" and "OFF" is
selected for "SENS UP": Fixed to "HIGH"
Freeze/menu button [FREEZE
u
Pressing this button: Displays the current image as a still
image when "FREEZE" in the SETUP menu is set to
"ON".
Note:
• Pressing a button other than the [
vides freeze cancellation.
• When the electronic zoom function or vertical/horizontal
flip function is assigned to the [e]/[f] button, the image
can be scaled up/down or flipped in the image freezing
state. Refer to page 31 for function assignment to but-
tons.
Pressing for 2 seconds or more: Displays the SETUP
menu.
Selection button [SEL]
i
Pressing this button while the SETUP menu is displayed
determines the setting.
Pressing this button except while the SETUP menu is
displayed calls up the SEL menu. (☞ Page 31)
Up/Down/Left/Right button
o
Up button [g]
This button moves the cursor upward to change a set-
ting item while the SETUP menu is displayed.
When "FLIP ENABLE" or "MIRROR ENABLE" in the
SETUP menu is set to "ON" (☞ page 30), the image can
be flipped vertically or horizontally.
Down button [h]
This button moves the cursor downward to change a
setting item while the SETUP menu is displayed.
When "FLIP ENABLE" or "MIRROR ENABLE" in the
SETUP menu is set to "ON" (☞ page 30), the image can
be flipped vertically or horizontally.
Left button [e]
This button moves the cursor leftward or selects a set-
ting while the SETUP menu is displayed.
This button moves the cursor in the minus direction on
the level adjustment scale or selects a setting item while
the SEL menu is displayed.
A function of the SEL menu can also be assigned to this
button. (☞ Page 31)
Right button [f]
This button moves the cursor rightward or selects a set-
ting while the SETUP menu is displayed.
This button moves the cursor in the plus direction on
the level adjustment scale or selects a setting item while
the SEL menu is displayed.
A function of the SEL menu can also be assigned to this
button. (☞ Page 31)
10
MENU ]
g]/[h] button pro-
!0 Color bar display/AWC button [BAR AWC ]
Pressing this button: Calls up the color bar on the
screen while an image is displayed. The color bar
becomes a blue back display while the SETUP menu is
displayed.
Pressing for 2 seconds or more: Starts up AWC while
an image is displayed if "WHITE BAL" in the SETUP
menu is set to "AWC" (☞ page 27).
Important:
• When the camera head is not connected, pressing the
[BAR AWC ] button does not activate any operation.
!1 Dynamic range selection button [D RANGE]
This button toggles the dynamic range between
NORMAL and EXPAND. The button lights green when
"EXPAND" is selected.
"EXPAND" shall be selected when dark portions are less
viewable because too bright portions are present in a
screen.
Note:
• The dynamic range can be set in the scene file. (
23)
!2 Camera cable connector
The camera cable (option) is connected to this connec-
tor.
☞ Page