Normal Operation; Operating Individual Devices; Shift Function; Recordings - Medion MD 82467 Bedienungsanleitung

Normal operation

Operating individual devices

After you have finished programming your remote control for your audio/video
devices, the remote control will work in the common main functions just like the
original remote control for the respective device.
Point your remote control at the desired device and press
the relevant mode key. The mode key label is displayed
with the programmed in code. [For the universal
functions – see Universal functions ("Punch Through") on
page 29 – you do not need to press the mode key in advance.]
Activate the functions by pressing the corresponding
function key on your universal remote control. The
symbol for infrared transmission appears each time you
press a key.
Each time a key is pressed the display backlight switches on for between 10 and
60 seconds (to set this duration please read: "Backlight" on page 10).
Please note:
In certain circumstances, not every function of your original remote
control may be directly available on the universal remote control.
Especially for newer devices, it might be possible that the functions are stored to
different keys than expected or may not even be available at all.
In these cases you can use the learn function to transfer the functions of your
original remote control to the desired keys of the universal remote control (see
"Learn function" on page 24).

SHIFT function

After you program a device code, the universal remote control keys can have
double functions (with the exception of the SETUP and MACRO keys).
To use the second function, briefly press the SETUP key and then (within 15-20
seconds) press one of the secondary function or number keys.
Try out which additional functions a key has for a particular device code.

Recordings

The (Record) key for recording (e.g. on video recorder, DVD, or cassette
recorder) must be pressed twice. This acts as a protection from accidental
recordings.
18