Scheppach HP800S Originalbetriebsanleitung Seite 19

Assembly
For reasons of packing, your machine is not completely as-
sembled.
Attaching the handle
Fixing parts:
2 hexagon bolts M 10 x 65
2 washers 10 mm dia.
2 lock nuts
1 hexagon bolt M 5 x 25
Fold lower and upper handle apart Fig. 2.1
Slide the handle in between the fixing brackets and se-
cure with 2 hexagon bolts M 10 x 65, 2 washers 10 mm,
and 2 lock nuts. Fasten the gas lever with slotted screw
M 5 x 25 to the upper handle. Fig. 2.2
Mounting the wheel base
Fixing parts:
2 hexagon bolts M 10 x 30
2 washers 10 mm dia.
2 lock nuts M 10
Fasten the pre-assembled wheel base to the holding -
brackets using 2 hexagon bolts M 10 x 30, 2 washers 10
mm, and 2 lock nuts (Fig. 2.3) (Rys. 2.3)
19