Introduction; Intended Use; Parts Description; Technical Data - Parkside PISG 80 A1 Originalbetriebsanleitung

Inverter welder PISG 80 A1

Introduction

Congratulations! You have
chosen a high-quality unit from
our company. Familiarise your-
self with the product before using it for the first time.
In addition, please carefully refer to the instructions
for use and the safety instructions below. Initial op-
eration of this tool must be performed by trained
personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

This welding tool is suitable for welding metals such
as carbon steel, alloy steel, other stainless steels,
copper, aluminium, titanium, etc. The product has a
control lamp, a thermal protection indicator, and a
cooling fan. It further has a strap to safely lift and
move the product. Improper product handling can
be dangerous to persons, animals and objects. Only
use the product as described and for its indicated
purpose. Keep these instructions in a safe place.
When passing this product on to others, please also
include all the documents. Any use other than the
intended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
are not covered by the warranty and are not included
in the manufacturer's liability.
Note: Classification per EMV stan dard: Class A
per IEC 60974-10
Warning: Equipment categorised Class A are in-
tended for industrial use. When used in other areas,
electromagnetic tolerance may not be warranted
or failures may occur.

Parts Description

Carrying strap
1
Overheating control lamp
2
270751_Inverter Schweissgeraet PISG 80 A1_content_IT_PT.indd 31
Introduction / Safety information
Control knob
3
Earthing lug
4
Electrode holder
5
Combination wire brush with chipping hammer
6
Welding shield
7
Grip
8
ON / OFF switch
9
Mains lead
10

Technical Data

Mains connection:
Max. welding current
and the respective
conventional load voltage: 10 A / 20.4 V–80 A /
Rated value of the
Mains voltage:
Highest rated value
of the mains current:
Maximum effective
input current:
Rated value of the
no-load voltage:
Protection class:

Scope of delivery

1 Inverter welder PISG 80 A1
1 Welding shield
2 Welding cables
1 Combination wire brush with chipping hammer
1 Carrying strap
1 Instructions for use

Safety instructions

Please carefully read the instructions for use and
follow the specified notices. Familiarise yourself with
the tool, its proper use and the safety notices using
these instructions for use. The nameplate contains
all the technical data for this welding tool, please
learn about the technical facts of this tool.
230 V∼ 50 Hz
23.2 V
U : 230 V
1
I : 14.3 A
1max
I : 11 A
1eff
U : 68 V
0
IP21S
GB/MT 31
27.01.16 15:00