Listening Through A Receiver - Samsung LE32A451C1 Bedienungsanleitung

Recording
You can make a recording of a tV programme using a recorder.
Press the button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣
You can also record the source streams by selecting "Record" after pressing the tOOLS button.
➣
Before recording, check whether the antenna jack is properly connected to the recording device. For
the antenna connection to the recording device, refer to its user manual.

Listening through a Receiver

You can listen to sound through a receiver instead of the tV speaker.
1. Press The tOOLS button. Then Press the ENtER
to select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Receiver", then press the
ENtER button.
. Press the ◄ or ► button to select to "On", then press the
ENtER button.
Now you can listen to sound through the receiver.
. Press the EXIt button to exit.
➣
When the receiver is set to On, you can listen to the TV sound
through the 2-channel receiver.
➣
If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣
In case of a content with copyright problem, listening through the receiver may not properly operate.
➣
If there is a power interruption to the TV when the "Receiver" is set to "On" (by disconnecting the
power cord or a power failure), the "TV Speaker" may be set to "Off" when you turn the TV on again.
(see page 23)
button
English - 5
tV P9
View tV
Select Device

Record

Menu on Device

Device Operation

Receiver :Off

Setup

Move Enter
Return