Recording; Listening Through A Receiver (Home Theatre) - Samsung LE32B530P7N Bedienungsanleitung

TV Remote Control Buttons Available in Anynet + Mode
Device Type Operating Status
After switching to the device, when the
menu of the corresponding device is
Anynet + Device displayed on the screen.
After switching to the device, while playing
a file
Device with built- After switching to the device, when you
in Tuner
are watching a TV programme
Audio Device When Receiver is activated
The Anynet + function only works when the active source on the TV remote control is set to TV.
N
The ∏ button works only while in the recordable state.
N
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV remote
N
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet + device.
N
The Anynet + functions do not operate with other manufacturers' products.
N
The π, µ operations may differ depending on the device.
N

Recording

¦
You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Record: (device_name), then press the ENTERE
button. Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
When the recording device is not displayed
N
Select Device List and press the red button to search devices.
3. Press the EXIT button to exit.
You can record the source streams by selecting Record: (device_name).
N
Pressing the ∫ button will record whatever you are currently watching. If you are watching video from another device, the
N
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
N
antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver (Home Theatre)

¦
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
3. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT
N
(OPTICAL) jack of the TV.
When the Home Theatre receiver is set to On, you can hear sound output from the TV's Optical jack. When the TV is
N
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre
receiver.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure),
N
the Speaker Select may be set to External Speaker when you turn the TV on again. (see page 17)
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTERE buttons
Colour buttons / EXIT button
π(Backward search) / µ(Forward search) / ∫(Stop) /
∂(Play) / ∑(Pause)
P > / P < button
Volume / MUTE button
English - 24
View TV
Device List
Record : DVDR
DVDR Operation
Receiver : On
Setup
U Move E Enter R Return