Mitsubishi Electric PAC-YT52CRA Installationsanleitung Seite 21

8If the set settings need to be changed, repeat steps 4 to 7.
To complete the settings, press the
seconds or longer.
Response has been received.
Indoor unit address setting
■ Checking the indoor unit Function Setting Value
1Perform the Procedure A on the previous page.
2Press the
. .
settings to be checked. (ALL, 1 to 50)
3Press the button, then press the
Function Setting No. to be checked. (000 to 255)
4Press the
. .
Function Setting No. setting
Waiting for response
Response has been received.
Setting completed
and the buttons to set the address of the indoor unit whose
. .
button to display the current Function Setting Value.
– 21 –
and the buttons at the same time for two
ON
OFF
No
response
2 sec.
+
and the
. .
Function Setting Value setting
The specified indoor unit does not
exist.
The setting for the specified
Function Setting No. has not been
completed.
buttons to set the
. .