3: Tiefenstopp (Ds); 4: Sicherheitsstopp (Ss); 5: Algorithmus - Oceanic PROPLUS 4.0 Bedienungshandbuch

3: TIEFENSTOPP
3: DEEP STOP
The Deep Stop feature can be set ON or OFF. Die Tiefenstoppfunktion kann an- oder ausgeschaltet werden.
3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
3: DEEP STOP
3: DEEP STOP
3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
The Deep Stop feature can be set ON or OFF.
The Deep Stop feature can be set ON or OFF. 3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
ADV SEL
ADV SEL
toggle
setting
toggle
Einstellung
ADV
ADV SEL
setting ADV SEL
wechseln
ADV
4: SAFETY STOP
toggle
toggle
toggle
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
4: SAFETY STOP
setting
setting toggle
setting
4: SICHERHEITSSTOPP
10, 15, or 20 ft or (3, 4, 5, or 6 m).
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
setting
ADV SEL
10, 15, or 20 ft or (3, 4, 5, or 6 m).
Die Sicherheitsstoppfunktion kann an- oder ausgeschaltet werden. Wenn SET ausgewählt ist, können Sie zwischen 3 oder 5 Min. Sicherheitsstopp 4: SAFETY STOP
4: SAFETY STOP
Set Safety Stop
ADV SEL
4: SAFETY STOP
toggle
auf Tiefen von 3, 4, 5 oder 6 m (10, 15, or 20 ft) auswählen. The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
4: SAFETY STOP
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
Set Safety Stop
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
setting
toggle 10, 15, or 20 ft or (3, 4, 5, or 6 m).
10, 15, or 20 ft or (3, 4, 5, or 6 m). The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
10, 15, or 20 ft or (3, 4, 5, or 6 m).
setting
10, 15, or 20 ft or (3, 4, 5, or 6 m).
Set Safety Stop
Sicherheitsstopp einstellen Set Safety Stop
4: SAFETY STOP
Set Safety Stop
Set Safety Stop
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
4: SAFETY STOP
10, 15, or 20 ft or (3, 4, 5, or 6 m).
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
10, 15, or 20 ft or (3, 4, 5, or 6 m).
Set Safety Stop
Set Safety Stop
ADV SEL
ADV SEL
toggle
setting
toggle
ADV
ADV SEL
setting
ADV ADV SEL
toggle
toggle
setting
setting toggle
toggle
5: ALGORITHM
Einstellung
setting
setting
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual ADV SEL
5: ALGORITHM
wechseln
Algorithm details.
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual ADV SEL
toggle
Algorithm details.
5: ALGORITHM
5: ALGORITHM
setting
toggle
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual 5: ALGORITHM
5: ALGORITHM
setting
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
Algorithm details.
Algorithm details. This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual

5: ALGORITHMUS

This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
Algorithm details.
Algorithm details.
Mit dieser Funktion wählen Sie den Z+ oder DSAT Algorithmus für die Nitrox- und Sauerstoffberechnungen. Für weitere Einzelheiten über den Dual
5: ALGORITHM
Algorithmus siehe Seite 12.
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual
5: ALGORITHM NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
Algorithm details.
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
or Z+
Algorithm details.
HINWEIS: Der Wechsel der Algorithmen ist während 24 Stunden nach NORM Tauchgängen blockiert. Es sei denn, Desat-Zeit
or Z+
(Entsättigung) nimmt auf 0:00 ab.
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
or Z+
or Z+
or Z+
or Z+
or Z+
oder Z+
or Z+
ADV
ADV
toggle
setting
toggle
ADV
ADV SEL
setting
ADV
toggle
toggle
ADV SEL
setting
setting toggle
toggle
setting
ADV
setting
ADV SEL
toggle
setting
toggle
Einstellung
wechseln setting
© Pelagic, 2019
© Pelagic, 2019
© Pelagic, 2019
or ON
oder An
or ON
or ON
or ON
or ON
or ON
or ON
or ON
save setting
save setting
Einst. speichern
SEL
SEL
save setting
save setting
save setting
save setting
save setting
save setting
flashing OFF, ON,
or SET
flashing OFF, ON,
or SET
OFF, ON
flashing OFF, ON,
flashing OFF, ON,
oder SET
flashing OFF, ON,
or SET
or SET flashing OFF, ON,
blinken
or SET
or SET
flashing OFF, ON,
toggle
or SET
flashing OFF, ON,
save setting,
setting
toggle
(proceed to Set Algorithm if or SET
save setting,
SEL
ON or OFF, to Set Stop Time
setting
(proceed to Set Algorithm if
if SET)
SEL
ON or OFF, to Set Stop Time
toggle
save setting,
save setting,
if SET)
setting
(proceed to Set Algorithm if toggle
(proceed to Set Algorithm if save setting,
save setting,
Einstellung speichern
ON or OFF, to Set Stop Time
ON or OFF, to Set Stop Time
setting
(proceed to Set Algorithm if
(proceed to Set Algorithm if
(weiter zu Set Algorithmus,
if SET)
if SET)
ON or OFF, to Set Stop Time
ON or OFF, to Set Stop Time
wenn ON oder OFF, zu Set
if SET)
toggle
if SET)
Stoppzeit, wenn SET)
save setting,
setting
toggle
(proceed to Set Algorithm if
save setting,
ON or OFF, to Set Stop Time
setting
(proceed to Set Algorithm if
if SET)
ON or OFF, to Set Stop Time
if SET)
SEL
SEL
save setting
save setting
SEL
SEL
save setting
save setting
save setting
save setting
SEL
save setting
Einst.
save setting
speichern
Set Stop Time
Set Stop Time
Set Stop Time
Set Stop Time
Tiefenstopp-Zeit einstellen
Set Stop Time
Set Stop Time
or 5:00
Set Stop Time
(min:sec)
or 5:00
Set Stop Time
(min:sec)
or 5:00
or 5:00
(min:sec) or 5:00
(min:sec)
(min:sec)
ADV SEL
or 5:00
ADV SEL
(min:sec)
or 5:00
save setting
(min:sec)
save setting
ADV SEL
ADV SEL
ADV ADV SEL SEL
toggle
save setting
save setting
setting
toggle
save setting
save setting
Einstellung
Einst. speichern
setting
ADV SEL
wechseln
ADV SEL
save setting
save setting
24
24
24
PROPLUS 4.0 BEDIENUNGSHANDBUCH
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
PROPLUS 4.0 OPERATING MANUAL
Set Stop Depth
Set Stop Depth
(10, 15; 20 ft)
or (3, 4, 5; 6 m)
(10, 15; 20 ft)
Set Stop Depth
Set Stop Depth
Stopptiefe einstellen
Set Stop Depth
or (3, 4, 5; 6 m)
Set Stop Depth
(10, 15; 20 ft)
(10, 15; 20 ft)
3, 4, 5; 6 m
(10, 15; 20 ft)
oder 10, 15;
or (3, 4, 5; 6 m)
or (3, 4, 5; 6 m) (10, 15; 20 ft)
20 ft.)
or (3, 4, 5; 6 m)
Set Stop Depth
or (3, 4, 5; 6 m)
Set Stop Depth
(10, 15; 20 ft)
oder 05:00 or 5:00
or (3, 4, 5; 6 m)
(10, 15; 20 ft)
(Min:Sek)
(min:sec)
or (3, 4, 5; 6 m)
ADV
ADV
toggle
setting
toggle
ADV
setting
ADV ADV
toggle
toggle
setting
setting toggle
toggle
Einstellung
setting
setting
wechseln ADV
ADV
toggle
setting
toggle
setting
SEL
SEL
save setting
save setting
ADV SEL
SEL
SEL SEL
save setting
save setting
save setting
save setting
Einst. speichern
SEL
SEL
save setting
save setting
Dok. Nr. 12-5669-r01 (18.01.2019)
Doc. No. 12-5669-r01 (1/18/19)
Doc. No. 12-5669-r01 (1/18/19)