Time Adjustment - Topcom BPM WRIST 2000 Gebrauchsanweisung

TOPCOM BPM Wrist 2000
8.3 Memory
The BPM Wrist 2000 has 3 Memory zones. Each can store up to 40
measurements including the date and time
The result will be stored automatically in the selected Memory Zone
after the measurement.
Select the desired Memory Zone before measurement after
pressing the START/STOP button
To recall measurement results:
When the clock is displayed:
• Press the MEMORY button
• Press the START/STOP button
zone.
• Press the MEMORY button
result.
• Press the MEMORY button
stored.
• After the oldest record is displayed, the unit will switch back to
normal time.
To erase all data from one memory zone:
• Press the MEMORY button
• Press the START/STOP button
zone.
• Press the MEMORY button
result.
• Press and hold the MEMORY button
all records from the selected memory zone.
8.4

Time adjustment

To adjust the date an time:
• Press the START/STOP
simultaneously. The month will blink on the display.
• Press the MEMORY button
month.
• Press the START/STOP button
day will blink on the display.
• Change the day, hours and minutes as described above,
using the MEMORY button
confirm every setting.
• After setting the minutes, the device is ready to use.
8
.
to enter memory mode.
M
select the desired memory
to see the last measurement
M
repeatedly for prior values
M
to enter memory mode.
M
select the desired memory
to see the last measurement
M
for 3 seconds to erase
M
and MEMORY button
successively to change the
M
to confirm the month. The
to change and the START/STOP button
M
to