Usb Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Silvercrest SBW 60 A1 Bedienungs- Und Sicherheitshinweise

USB operation

1. Insert the USB device.
2. Press the button on the unit repeatedly or
press the USB button on the remote control
to select USB mode.
3. During playback:
To pause or resume play, press the
/PAIR button on the remote control.
To skip to the previous/next file, press the
/ buttons on the remote control.

Bluetooth operation

Pair Bluetooth-enabled devices

The first time you connect your Bluetooth device to
this unit, you need to pair your device to this unit.
Note:
• The operational range between this player and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
• Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1. During ON mode, press the
repeatedly on the unit or press the BT
(Bluetooth) button on the remote control to
select Bluetooth mode. The Blue indicator
will flash slowly.
2. Activate your Bluetooth device and select the
search mode. "SBW 60 A1" will appear on
your Bluetooth device.
If you cannot find the unit, press and hold
the
The system will enter pairing mode. You will
hear "Pairing" from the unit and the Blue
indicator will flash fast.
3. Select "SBW 60 A1" in the pairing list.
After the "Paired" voice prompt, the system
is now successfully connected and the Blue
indicator will light up solidly.
4. Play music from the connected device.
Disconnect Bluetooth function
• Switch to another function on the unit.
• Disable the function from your Bluetooth
device. The unit will emit a "Disconnected"
voice prompt.
• Press and hold the
remote control.
Note:
• Enter "0000" for the password if necessary.
• If there is an existing connection, press and
hold the
control to re-activate the pairing mode, the
existing connection will be interrupted and the
Blue indicator will flash.
• If no other Bluetooth device pairs with the
unit in 2 minutes, the unit will reconnect to the
previous connection.
• The unit will be disconnected when your device
is moved beyond the operational range.
• If you want to reconnect your device to the unit
place it within the operational range. When it
is brought back in range, check that the device
is still connected to the unit.
• If the connection is lost, follow the instructions
above to pair your device to the unit again.
button
/PAIR button on the remote control.
/PAIR button on the
/PAIR button on the remote
GB/IE 39