Operation; Bluetooth Operation - Silvercrest SBW 60 A1 Bedienungs- Und Sicherheitshinweise

Operation

Standby/ON
When you first connect the unit to the mains socket,
the unit will be in Standby mode.
• Press the button on the unit or on the remote
control to switch the unit on.
• Press the button again to switch the unit
back to standby mode. The power indicator
will light up red.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
• If the unit is idle for over 15 minutes, the unit
will automatically switch to Standby mode.
Select modes
Press the SOURCE button repeatedly on the
unit or the AUX, HDMI ARC, COAXIAL,
OPTICAL and BT (Bluetooth) buttons on the
remote control to select the desired mode.
Adjust the volume
• Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
• If you wish to turn the sound off, press the
MUTE button on the remote control. Press
the MUTE button again or press the VOL+
/ VOL- buttons on the unit or on the remote
control to resume normal listening.
• While adjusting the volume, the status indicator
flashes quickly.
• When the volume level reaches its maximum
level, if you press the VOL+ button again, the
status indicator flashes once. When the volume
level reaches its minimum level, if you press
the VOL+ button again, the status indicator
flashes once.
Select a preset sound effect
While playing, press the EQ button on the unit
or the NEWS, MOVIE, MUSIC buttons on the
remote control to select between preset equalisers.
AUX / HDMI ARC / COAXIAL /
OPTICAL operation
1. Ensure that the unit is connected to the TV or
audio device.
2. Press the SOURCE button repeatedly on the
unit or the AUX, COAXIAL, HDMI ARC
and OPTICAL buttons on the remote control
to select the desired mode.
3. Operate your audio device directly for
playback features.
4. Press the VOL +/VOL– button to adjust the
volume to your desired level.
Note:
While in HDMI ARC, COAXIAL, OPTICAL
mode, if there's no sound output from the unit and
the status indicator flashes quickly, you may need
to activate PCM Signal output on your source
device (e.g. TV, DVD or Blu-ray player).

Bluetooth operation

Pair Bluetooth-enabled devices
The first time you connect your bluetooth device to
this the unit, you need to pair your device to the
unit.
Note:
• The operational range between this unit and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
• Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
GB/IE 35