T Rouble Shooting; Malfunction Table; Led Lights - Gaggenau AW 2 series Gebrauchs- Und Montageanleitung

Installing the metal mesh grease filter
m
Warning. Risk of injury!
Components inside the appliance may have sharp edges.
Wear protective gloves.
Note: . Clean all accessible parts of the housing.
1 Insert the metal grease filter and lock it in place. When
you do this, take hold of the metal grease filter from
underneath with your other hand.
Note: . Make sure that the metal grease filter is positioned
correctly.
2 If the metal grease filter has not been inserted correctly,
open the lock and reinsert the metal grease filter
correctly.

T rouble shooting

3
Malfunctions often have simple explanations. Please read the
T r o u b l e s h o o t i n g .
following notes before calling the after-sales service.
m
Warning. Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The LED lights
does not work. are defective.
The button illu- The control unit
mination does is faulty.
not work.
--------

LED lights

Defective LED lights may be replaced by the manufacturer,
their customer service or a qualified technician (electrician)
only.
m
Warning. Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.
Trouble shooting en
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is OK
Call the after-sales ser-
vice.
Call the after­sales ser-
vice.