Silvercrest SSOT 6 B2 Bedienungsanleitung Seite 115

3. Make sure that the measuring head
measuring sensor are clean.
4. Press the "FOREHEAD" button
button
2
is shown in the LC display
5. Hold the measuring head at a distance of 1 cm from
the liquid and / or surface whose temperature you
want to measure.
6. Press the "EAR" button
7. Now you can read off the measurement result on the
LC display
8. Values can be displayed in °C as well as in °F
(see "Functions / error analysis - selecting the
temperature unit").
9. Press the "EAR" button
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the "FOREHEAD" button
button
2
display
4
and time, as well as the
2. You are now back in standard mode.
repeatedly at the same time until "Food"
2
(Illustration E).
4
2
repeatedly at the same time until the LC
again shows the room temperature, date
and the
1
and the "EAR"
3
(Illustration E).
4
to start the measurement.
again to carry out further
and the "EAR"
3
symbol (Illustration D).
GB 115