Using For The First Time - Trixie TR1500 Gebrauchsanweisung

• Do not use this appliance with a damaged or broken blade or comb, as injury to the skin
may occur.
• To disconnect turn control to "0" then remove plug from outlet.
• Warning: During use, do not place or leave appliance where it may be damaged by an
animal or exposed to the weather.
• Before using as well as after each use the blades has to be oiled. Blades may become
hot during use. Check often to prevent burning animal.
• Keep the appliance dry.
Save these instructions!

Using for the first time

Plug the cord into an electrical outlet, operate at 230-240 volt, 50 cycle AC electrical
current or as noted on the unit. To start the clipper move the switch button to the "ON"
("I") position. To stop, move the switch button back to the original position. After using your
clipper TR1500, rewrap the cord and store in a safe place.
Clipper blade adjustment
The clipper blade set is easy to adjust. From coarse to fine cuts, all that's needed is a flick of
the adjustment lever with your thumb. In the upright position, blades are set for the finest,
or shortest cuts (Figure A).
Using the attachment combs
Some models do not have combs and sizes will vary by kit. You can set the blades for a
longer cut by using any of the attachment combs made for your clipper TR1500. The combs
mount easily; simply slip the cutter blade teeth into comb and snap the comb down. To
remove, simply snap off (Figures B & C). These attachment combs guide hair into the blades
and give you precise control of hair lengths. The length of trim is indicated on the attach-
ment comb. Use the chart to find the approximate lengths of cut. Different blade angles in
relation to the skin, thickness and texture of the hair will vary the cutting length.
10