Warnings And Precautions; Operating Environment - Mettler Toledo ACM500 Installationsanleitung

1.2.

Warnings and Precautions

Please read these instructions carefully before putting the new ACM500 module into operation.
Although the ACM500 communication module is ruggedly constructed, it is nevertheless a precision
instrument. Use care in handling and installing it.
1.3.

Operating Environment

When selecting a location:
•
•
•
1-2 METTLER TOLEDO ACM500 Installation Manual
Phone (International): (614) 438-4888
www.mt.com
METTLER TOLEDO (Europe)
Postfach 250
D-72423 Albstadt, Germany
Phone: (+49-7431) 140
www.mt.com
DO NOT INSTALL OR PERFORM ANY SERVICE ON THIS EQUIPMENT BEFORE THE AREA IN
WHICH THE IND560x IS LOCATED HAS BEEN SECURED AS NON-HAZARDOUS BY
PERSONNEL AUTHORIZED TO DO SO BY THE RESPONSIBLE PERSON AT THE CUSTOMER'S
SITE.
ONLY THE COMPONENTS SPECIFIED IN THIS MANUAL CAN BE USED IN THIS DEVICE. ALL
EQUIPMENT MUST BE INSTALLED IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS
DETAILED IN THIS MANUAL. INCORRECT OR SUBSTITUTE COMPONENTS AND/OR DEVIATION
FROM THESE INSTRUCTIONS CAN IMPAIR THE INSTRINSIC SAFETY OF THE TERMINAL AND
COULD RESULT IN BODILY INJURY AND/OR PROPERTY DAMAGE.
THE ACM500 COMMUNICATION MODULE IS DESIGNED TO OPERATE IN, AND MUST BE
LOCATED IN, A SAFE AREA. ONLY THE FIBER OPTIC OR LOW POWER CURRENT LOOP SERIAL
INTERFACE CAN CONNECT INTO THE HAZARDOUS AREA WITHOUT ADDITIONAL BARRIERS OR
OTHER PROTECTION.
Choose a stable, vibration-free surface to mount the module
Ensure there are no excessive fluctuations in temperature
Be certain the cable glands and blanks are properly sealed to maintain the integrity of the
enclosure.
WARNING
WARNING
WARNING
64061976 | 07 | 01/2019