Listening To The Radio - Muji MJBTS-1 Bedienungsanleitung

Listening to the radio

1
Press the MODE button to set the
source to FM.
When "FM" appears,
the frequency is
shown.
o You can also use the MODE button on the
remote control.
2
Choose a station.
Automatic tuning
Press and hold a skip (.//) button for 2 or
more seconds until the frequency shown on the
display begins to change.
When a station has been automatically tuned
in, the display will stop changing and show the
frequency.
o To stop automatic tuning at any time, briefly
press a Skip (.//) button.
18
Press and hold
Manual tuning
If you want to tune in a station that cannot be
tuned in automatically, press the Skip (.//)
buttons repeatedly to set the frequency of the
station.
o Each time you press a Skip (.//) button,
the frequency will change by 0.1 MHz.
o You can also use the Skip (.//) buttons
on the remote control.
3
Press the volume (–/+) buttons to
adjust the volume.
VOL 05
Volume level
shown
o The volume can be adjusted in a range between
00 and 32. ("MAX" is shown on the display at 32.)
If reception is poor
If reception is poor, change the direction and placement
of the FM antenna and find a position that provides the
best reception.
Turning the unit off
Gently pull the power cord down or press the Power
( ) button on the remote control.