Audio Settings; Audio Input; Phantom Power - Blackmagic Design URSA Bedienungsanleitung

Settings
30
Record channel 1 audio on channels 1 and 2 by selecting 'yes'
on the 'ch 2 uses ch 1 input' setting.

Audio Settings

To adjust audio input and monitoring settings on your Blackmagic URSA, select the 'audio' touchscreen
menu, then tap or slide the relevant arrows and slider icons with your finger. Scroll the menu to reveal
more audio settings.

Audio Input

To change the audio input between camera mic and external XLR inputs, select 'camera' or 'inputs'.
Microphone Level
Microphone level adjusts the recording levels for Blackmagic URSA's built in microphone. Move the
audio slider left or right to adjust levels. The built in microphone records to audio channels 1 and 2.
Input Levels
Set the external audio input levels by tapping the relevant left and right arrow icons. External audio
connectors support line, or microphone levels with 48V phantom power. It's important to select the
appropriate level for your audio signal. Level settings include 'line', 'mic low', and 'mic high'.
Channel 1 Input
Scroll the menu to reveal
Touch and drag the ch 1 Input slider icon left or right to adjust the channel 1 audio level.
more audio settings.
Channel 2 uses Channel 1 Input
Select 'yes' if you want to record channel 1 external audio to channels 1 and 2. Select 'no' if you want
channel 1 audio to remain on one channel only.
Channel 2 Input
Touch and drag the ch 2 Input slider icon left or right to adjust the channel 2 audio level.

Phantom Power

Select 'on' to enable phantom power, or 'off' to disable. The phantom power setting is active only
when 'audio input' is set to 'inputs' with 'mic low' or 'mic high' input levels selected.
Headphone and Speaker Volume
Touch the headphone or speaker volume icon and drag left or right to adjust audio monitoring levels.
When headphones are connected, the headphone setting is displayed. Alternatively, when headphones
are not detected, the speaker setting is displayed. Headphones are active when recording or playing
a clip. The built in speaker is active only during playback.