Led Settings Function - Hama N300 Bedienungsanleitung

• To change the password, enter the current password in the Current password box. If you have left
the default settings unchanged, the current password is hama.
• Enter the new password twice, in both the New password box and Re-enter password box, ensu-
ring that the entries are identical. Then click Apply.
• Save the settings, click Apply. All settings will otherwise be lost. The next window confirms that
the settings have been saved.
Note
► Note that you must restart the repeater at least once in order for altered settings to
be applied.
You can now restart the repeater or make further settings.
• If you wish to restart the repeater, click Apply.
• To make additional settings, click Continue.

7.2.5 LED settings function:

The LED settings option allows you to completely deactivate the indicators on the repeater or to
leave only the power LED activated.
• Activate the LED settings by placing a check in the Enable LED settings checkbox and then selec-
ting your desired option.
• To save the settings, click Apply. All settings will otherwise be lost. The next window confirms that
the settings have been saved.
•
Note
► Note that you must restart the repeater at least once in order for altered settings to
be applied.
You can now restart the repeater or make further settings.
• If you wish to restart the repeater, click Apply.
• To make additional settings, click Continue.
WLAN 300 Mbps Repeater
19