Preparing The Weather Station For Use - Auriol Z31130 Bedienungs- Und Sicherheitshinweise

Installing the Outdoor Sensor:
Note: You will need an electric drill for this step.
Find an appropriate place for the outdoor sensor.
Note: Please ensure that you install the outdoor sensor within a radius of 30 m
from the weather station. Check that there are no obstacles between the outdoor
sensor and the weather station. Otherwise there may be interference of the
transmission of data.
For wall mounting:
Hang the outdoor sensor with the mount

Preparing the weather station for use

Removing the battery safety strip:
Open the battery compartment
Pull out the battery safety strip.
Then close the battery compartment.
As soon as the battery safety strip has been removed, the weather station starts to
receive the radio signal.
on one screw.
42
on the back of the weather station.
40
Before use
GB/IE 17