Gallagher TWR-5 Kurzanleitung Seite 10

Notes:
• When the weight locks, there will be a beep (if turned on in Se ngs) and a red
light above the Weigh bu on displays briefl y.
• Other informa on, for example: Notes, can be entered once the weight has
locked or an ID has been entered.
• In either mode, you can re-weigh an animal by pressing
successful weight lock.
• If dra ing is turned on, the gate number and group will display, in top right
corner of the screen, indica ng the dra ing category. Tap this box to override
the dra ing decision.
• By default the scale will automa cally zero any debris le on the pla orm
between 2-5kg depending on the capacity of your loadbars. This can be
altered in the connected loadbar se ngs.
• If using traits within a session, the selected traits will appear down the right
side of the screen. A maximum of 9 traits can be used in any one session.
Once an animal is iden fi ed, simply tap the trait box to assign a value.
Reading tags with the Internal Reader
When the internal reader is connected it will display as
• If no loadbars are detected, the internal reader will always be ac ve, ready to
read a tag and will display as
• If loadbars are connected, the footer will display
on the pla orm.
The symbol will then change to
will go in and out of ac ve mode as it detects weight on the weighing
pla orm.
10
Gallagher TWR- Weigh Scale Quick Start Guide
.
, as it reads the tag. The internal reader
Weigh
a er a
in the screen footer.
un l a weight is detected