Read Before Operation - GPO STYLO II Bedienungsanleitung

READ BEFORE OPERATION

Keep these instructions for future use.
Handle the unit with care at all times
Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust,
heat, cold or moisture.
Make sure no liquid is spilled on device and device openings.
The ventilation holes should not be covered. Make sure there
is enough space above and beside the amplifier/receiver.
Do not place a CD player or other equipment on top of the
Turntable Player/Recorder.
Do not open or disassemble the cabinet, as this may result
in damage to the circuitry or electrical shock.
The power cord should be unplugged during long period of
inactivity.
Do not attempt to clean the unit with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
The user shall not try to maintain device beyond that
which is described in this information form. The guarantee
would negate.
3
INSTALLATION AND OPERATION
CAUTION: To avoid stylus damage, make certain the included
stylus guard is in place whenever the turntable is being
installed, moved or cleaned.
1 Stylus Assembly
2 Stylus (Needle)
3 Stylus Guard
TURNTABLE FEATURES
3-speed turntable fit suitable to play at 33, 45, 78 rpm
Belt-drive and semi-automatic play tone arm
Ceramic stereo cartridge with jewel stylus
Built-in 45 rpm adapter
3.5mm headphone socket (front)
L/R output jack(rear)
Full range stereo speakers
Translucent plastic dust cover
Pitch Control to adjust the Turntable speeds
DC 9V/1A Adapter
1
2
3
4