EINHELL TE-LD 60 Originalbetriebsanleitung Seite 24

•
Press button A once: Switch on the laser
•
Align the laser
•
Press button A once: Measure the hypotenu-
se (c)
→ The length of the opposite side (a) is dis-
played at the bottom in m
6.7.9 Function: "Indirect distance measure-
ment 3" (Section (a') of the opposite side (a)
using the Pythagoras rule)
Symbol (Fig. 13)
Procedure:
•
Press button A: Switch on the equipment
•
Press buttons C + A: Call up the menu and
select a function and subfunction (see 6.4)
•
Press button G if necessary: Select the refe-
rence point on the equipment (see 6.6)
Caution!
The opposite side (a), from which the section
(a') is to be measured, and the adjacent side
(b) must be at right-angles to each other (see
Fig. 13).
Important!
The measurements are of the fi rst and se-
cond hypotenuse (c1, c2). The angle between
lengths (c) and (b) is automatically measured
in the background. The value which is then
displayed is the resultant calculated section
(a') of the total opposite side (a).
•
Press button A once: Switch on the laser
•
Align the laser
•
Press button A once: Measure the first hypo-
tenuse (c1)
•
Press button A once: Switch on the laser
•
Align the laser
•
Press button A once: Measure the second
Measure the hypotenuse (c2)
→ The length of section (a') of the opposite
side (a) is displayed at the bottom in m
6.7.10 Function: "Measure continuous dis-
tance (min/max)"
„Symbol " (Fig. 14)
Procedure:
•
Press button A once:
Switch on the equipment
•
Press buttons C + A: Call up the menu and
select a function (see 6.4)
•
Press button G if necessary: Select the refe-
rence point on the equipment (see 6.6)
Anl_TE_LD_60_SPK9.indb 24 Anl_TE_LD_60_SPK9.indb 24
GB
•
Press button A once: Switch on the laser
•
Align the laser
•
Press button A: Continuous measurement
→ Min: The lowest measurement result is dis-
played (Fig. 14a)
→ Max: The highest measurement result is
displayed (Fig. 14b)
The current measurement result is displayed
right at the bottom in real time
6.7.11 Function: "Leveling function (spirit le-
vel) / Angle meter"
Symbol (Fig. 15)
Procedure:
•
Press button A: Switch on the equipment
•
Press buttons C + A: Call up the menu and
select a function (see 6.4)
→ Inclination range 0° - 20° (equipment hori-
zontal): Leveling function (spirit level)
→ Inclination range 20° - 90°: Angle meter
6.7.12 Memory (Fig. 3 / Item 4 C, D, E, F)
Symbol:
The last 50 measured values are automatically
saved in the memory. Proceed as follows to go to
the memory:
•
Press button A: Switch on the equipment
•
Press buttons C + A: Call up the menu and
select a function (see 6.4)
Use buttons D (+) and F (-) to browse the
memory.
To delete the saved values, press button E.
6.8 Deleting values (Fig. 3 / Item 4 E)
To delete any wrongly measured values again,
press button E briefly. You can then perform the
measurement again.
6.9 Bluetooth® (Fig. 3 / Item 4 B)
You can connect the measuring device to your
smart phone or tablet via Bluetooth® and docu-
ment your measurement results using a special
Einhell Measure Assistant App.
Connecting via Bluetooth®:
•
Press button B briefly to activate Bluetooth®.
•
Activate Bluetooth® on your smart phone or
tablet
•
You can then use the Einhell Measure As-
sistant App to connect the measuring device
with your smart phone or tablet.
You can download the Einhell Measure Assistant
App from suitable stores.
- 24 -
21.12.2017 13:23:00 21.12.2017 13:23:00