Waeco PerfectCharge CA360 Montageanleitung Seite 36

Installing the device
NOTICE!
A
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
For installation and mounting you will need the following tools:
 Pen for marking
 Drill bit set
 Drill
 Screwdriver
To secure the device in place you will need:
 Machine bolts (M4) with washers and self-locking nuts or
 self-tapping screws or wood screws.
Fasten the device as follows:
➤ Hold the device against the installation location and mark the fastening
points.
➤ Fasten the device with one screw through each hole in the holders.
36
Perfect Charge CA360
EN