Garmin GFS 10 Kurzanleitung Seite 4

Select the option to add fuel.
• Set the total fuel capacity of the boat to
accurately calculate remaining fuel based on
fuel-flow rate. To do so, go to the configuration
options for NMEA 2000 devices on your
marine instrument, or the My Boat information
section of your Garmin chartplotter.
• The Garmin chartplotter or marine instrument
must be powered on to calculate remaining fuel
based on fuel-flow rate.
Using fuel-level information with a
Garmin chartplotter or marine
instrument
• Connect the wiring harness on the GFS 10 to
the fuel gauge (level-sensor) of your boat to
receive fuel-level information.
• Calibrate the fuel-level on your Garmin
chartplotter or marine instrument. While in
still water, go to the configuration options
for NMEA 2000 devices on your Garmin
chartplotter or marine instrument and enter a
calibration point that corresponds to the current
level of your fuel tank.
• Entering more calibration points will provide a
more accurate reading. For example, entering
five calibration points (empty tank, 1/4 tank,
EN–