Incremental Weighing; Troubleshooting - Silvercrest IAN 113060 Bedienungs- Und Sicherheitshinweise

2. Press the MODE button
indicator (g / ml / lb'oz / fl'oz).
3. Place the substance to be weighed on the scale. The
weight of the substance being weighed is shown in the
LC display
Incremental weighing (Fig. A)
1. Follow steps 1 to 3 of the section on "Weighing" and
press the TARE button
and the TARE symbol
2. Add another substance to be weighed to the scale. The
LC display
stance.
3. If you remove the added substance from the scale, the
LC display
4. If you remove all of the substances to be weighed from
the scale, the LC display shows a negative value
5. Press the TARE button
ceases to be displayed.
If there is no substance to be weighed on the scale and if 60
seconds elapses without a button being pressed or no movement
on the scale plate is noted, the scale switches automatically
into the time mode

Troubleshooting

= Fault
= Cause
= Solution
46 GB/MT
3
.
1
2
10
shows the weight of the newly added sub-
1
shows 0.
1
2
.
5
once to change the weight unit
. The LC display
appears.
once and the TARE symbol
shows 0
1
.
11
10