Weighing; Incremental Weighing; Changing The Measuring Unit; Displaying Nutritional And Energy Values - Silvercrest HG04458A Bedienungs- Und Sicherheitshinweise

Weighing

Note: Always place the object you wish to weigh
gently onto the weighing surface
ing the glass surface.
Press the button ON / OFF
product. The LC display
for approx. 2 seconds.
During this time the weighing equipment on the
product is adjusting. Afterwards the numerical
display will read „0". The unit display
17
show the last unit selected.
Note: if an object (e.g. a key) is already on the
weighing surface
1
numerical display
17
Place the item you wish to weigh onto the weigh-
ing surface . The numerical display
1
show the weight of the item you are weighing.

Incremental weighing

Pressing the button TARE
will change the numerical display
reading to „0". The TARE symbol T
Now add another item to weigh onto the weigh-
ing surface . The numerical display
1
show the weight of the newly added item.
If you remove the item added to the product, the
numerical display
17
If you remove all items from the product, the LC
display will show a negative value indicated
2
by the minus symbol -
Then press the button TARE
will again read „0" and the TARE symbol T
17
will disappear.
Important! Be sure never to add more than 5 kg
to the weighing surface
can damage it.
to avoid damag-
1
to switch on the
6
will show all displays
2
14
while switching on, the
will still read „0".
will
17
with the product on
5
from the
17
will appear.
16
will
17
will again read „0".
.
15
. The numerical display
5
. Overloading the product
1

Changing the measuring unit

To switch the unit of measure, press the button UNIT
. After each time it is pressed, the unit display
7
will switch to the next unit listed:
Displaying nutritional
will
and energy values
Switch on the product as described in section
„Weighing".
Place the food to be weighed on the weighing sur-
face .
1
Look up the appropriate code for the food to be
weighed from the food list provided at the end of
these instructions.
Enter the 3-digit code using number buttons
e.g., 013. The nutritional and energy display
will then show the following Nutritional and en-
ergy values for the weighed amount:
PROT:
FAT:
CARB:
BE:
KJ:
KCAL:
CHOL:
Note: As energy and nutritional values fluctuate natu-
rally, these values only serve as guide values. If you
make a mistake when entering the code, simply re-enter
16
the code.
kg/g -> lb'oz -> oz
protein
fat
carbohydrates
bread units
kilojoules
kilocalories
cholesterol
14
,
3
11
GB/IE 37