Troubleshooting - Panasonic povcam AG-HCK10G Bedienungsanleitung

Troubleshooting

Starting up
Power does not come on.
Unusual sound is heard.
Shooting
Cannot start shooting.
Cannot focus automatically. • Make sure the camera is in auto focus mode, where you can focus automatically.
Video is distorted or not
recorded.
E-13
• Make sure the camera head option cable is connected properly.
Refer to the connections on page E-9.
• Some operating sounds may be evident when powering on, switching
operation modes and zooming. Sounds in such cases do not necessarily
indicate a problem.
• Make sure the recorder's operation mode is CAM mode.
With the recorder's power off, connect the camera head option cable correctly,
and turn on the power. (Page E-9)
The CAM mode will not be established even when the camera head option
cable is connected while the recorder's power is on.
• You may be shooting a scene where it is difficult to bring the subject into focus
in the auto focus mode. If this is the case, focus in the manual focus mode.
It may be hard to bring the subject into focus when:
· both close and distant objects are to be shot
· shooting through a dirty window
· shooting in a dark place
· there are sparkling or shiny objects around the subject
· the subject is moving fast
· shooting a scene with minimal contrast
• Make sure the connection has been made to the recorder correctly. (Page E-9)
• Make sure the connection has been made to the recorder using the camera
head option cable. (Page E-8)