Cleaning And Maintenance; Replacing The Fuse - Futurelight PRO Slim PAR-12 MK2 CW/WW/A Bedienungsanleitung

Control-channel 5 – Strobe effect
Value
0 4 No function
5 255 Strobe effect with increasing speed
Control-channel 6 - Static colors (preset colors)/color changes
Value
0 50 No function
51 100 Static colors
101 150 Switching colors
151 200 Fading colors
201 250 Pulsing colors
251 255 Sound control
Control-channel 7 - Static colors (CH6 values 51-100)/color changes (CH6 values
101-250)
Value
0 31 Cold white
32 63 Warm white
64 95 Amber
96 127 Light amber
128 159 White 1
160 191 White 2
192 255 White 3
0 255 Color changes with increasing speed

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
Feature
Feature
Feature
21/24 00114710, Version 1.0