Extraction Air System Assembly - Küppersbusch KMI9850.0 Bedienungsanweisung

7.7 Extraction air system assembly

The hob and the fan can be connected with a fl exible hose
or a fl at duct.
Shorten the fl at duct with a fi ne saw if necessary.
Option fl exib-
le hose
On point c
Please make sure that installation is as taut and crea-
se-free as possible by shortening excess material.
On point f
Apply sealing tape to the plinth fan connecting pieces (f)
before attaching the adapter piece (d) to the plinth fan (e).
Important:
The components must all be fi rmly fastened as shown
with the adhesive tape enclosed after they have been
attached.
Instructions for assembly
Option fl at
duct
Exhaust air duct components (optional):
Fan
Sealing tape
Plinth fi lter (optional):
Charcoal fi lter
h
Plasma fi lter
GB
41