Hardware - Pioneer VSX-LX503 Bedienungsanleitung

Setting Item Default Value Setting Details
Fixed PCM Off Select whether to fix input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "Off" normally.
• The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is
selected.
• Each time the "Audio Select" setting is changed,
the setting is restored to "Off".
Contents Connections
≫

Hardware

„ HDMI
Change the settings of the HDMI function.
Setting Item Default Value
HDMI CEC Off
129
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Setting this to "On" enables the input selection link
and other link functions with HDMI-connected CEC-
compatible device.
"On": When this function is used
"Off": When this function is not used
When this setting is changed, turn off and then on
again the power of all connected devices.
• Depending on the TV to use, a link setting may
be required on the TV.
• This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
• Setting this to "On" and closing the operation
screen will display the name of the connected
CEC-compatible device and "CEC On" on the
main unit's display.
• When this is set to "On", the power consumption
in standby mode may increase. (Depending
on the TV status, the unit will enter the normal
standby mode.)
• If you operate the MASTER VOLUME dial on the
main unit when this setting is "On" and audio is
output from the TV speakers, audio will be output
also from the speakers connected to this unit. To
output audio from only either of them, change the
setting of this unit or TV, or reduce the volume of
this unit.
• If abnormal behavior is observed when this is set
to "On", set it to "Off".
• If a connected device is not CEC-compatible, or
if you are not sure whether it is compatible, set
it to "Off".
≫