Safety Instructions - IKA mini G Betriebsanleitung

For your protection
Read the operating instructions in full
before starting up and follow the safety
instructions.
re they can be accessed by everyone.
pliance.
pational health and safety and accident preven-
tion regulations.
accordance with the hazard category of the
medium to be processed. Otherwise there is a
risk of:
- splashing and evaporation of liquids
- body parts, hair, clothing and jewellery get-
ting caught.
stable, clean, non-slip, dry and fireproof sur-
face.
undamaged.
hand for damage each time you use them. Do
not use damaged components.
cover for cracks. If damage is evident, send the
device back to have the cover replaced..
secure attachment. Ensure the rotor is well se-
cured, see "Inserting and removing the rotor".
ous internal material damage can occur as a
result of even slight scratches and cracks. Do
not use the device if the rotor is damaged.
dence of damage to the centrifuge chamber.
The device must be supervised when it is running.
ration.
"Loading the rotor" in the chapter "Setting up
and commissioning".

Safety instructions

imbalances arise during centrifuging.
stances must not exceed 1.2 kg/dm
centrifuge is running at maximum speed.
-
started, the rotor is not secured correctly. In
-
this case, immediately press "STOP" to stop the
centrifuge.
-
rance of 300 mm all around must be kept clear
of persons, objects and hazardous materials.
tor chamber when the rotor is rotating.
centrifuge is running opens the cover and trig-
gers a quick stop of the motor. This can lead to
poor centrifuging results.
it or strike it.
ces or mixtures of substances which are toxic
or are contaminated with pathogenic micro-
-
organisms, the user should take appropriate
precautions. In such cases, centrifuging vessels
with special screw seals for hazardous substan-
ces must always be used. For materials in risk
groups 3 and 4, in addition to sealed centrifu-
ging vessels a bio-safety system must be used
(see the "Laboratory Biosafety Manual" issued
by the World Heath Organisation). No bio-safe-
ty systems are available for this centrifuge.
-
the device from being damaged by these che-
micals.
-
inters pose a risk of injury.
In the event of unbalance or unusual noises,
switch off the appliance immediately. In additi-
-
on, if imbalances or unusual noises occur, send
the device to the dealer or the manufacturer
for repair, accompanied by a description of the
fault.
cessories!.
DANGER
hazardous substan-
-
when the
3
-
-
-
-
13