Inserting/Removing The Battery; Recharging The Battery - Parkside PLLA 12-Li A1 Originalbetriebsanleitung

There is a risk of
injury due to electric
shock.
Only use the original
charger from the
package to charge
the battery.
Make sure that the
mains supply voltage
matches the voltage
rating indicated on
the device's type plate
• Charge the battery befo-
re the first time of use.
• If a fully recharged batte-
ry lasts for considerably
shorter operating times,
the battery is used up and
needs to be replaced.
Only use an OEM spare
battery available from our
Customer Service.
Inserting/
removing the
battery
1. To insert the battery (1),
place it on the guide
track and push it back
into the appliance. It will
audibly snap in.
2. To remove the battery
(1) from the appliance,
press the release buttons
(2) on the battery and
pull out the battery.
Recharging the
battery
Charging time is
approximately one
hour
1. Remove the battery (1)
from the appliance i
necessary.
2. Insert the battery (1) in
the charging compart-
ment of the battery
charger (11).
3. Plug the battery charger
(11) into a mains outlet.
4. When the battery is
fully recharged unplug
the battery charger (11)
from the mains.
5. Pull the battery (1) out of
the battery charger (11).
Overview of the LED indica-
tors on the charger (12):
Green LED lights up without
battery inserted:
Charger ready.
Green LED lights up:
Battery such alleged char-
ged.
Red LED lights up:
Battery charging.
G B I E N I
1 1