Overheat Protection; Overload Protection; Cleaning And Maintenance - Philips HP6577 Bedienungsanleitung

EnglisH
14

overheat protection

This function helps to prevent overheating of the appliance.
Note: To avoid overheating of the appliance, do not press it too hard onto
your skin. The appliance works best when you move it over your skin without
excessive pressure.
If the overheat protection is activated, the appliance switches off automatically
and the charging light and the speed lights flash red for 30 seconds.
You can deactivate the overheat protection by letting the appliance cool
down and then switch it on again.
Note: If the charging light flashes red again, the appliance has not yet cooled
down completely.

overload protection

If you press the epilating head onto your skin too hard or when the
epilating discs of the epilating head get blocked (e.g. by clothes), the
appliance switches off automatically and the speed lights flash red for 5
seconds.
1 Turn the epilating discs with your thumb until you can remove
whatever blocks the epilating discs.

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse it
in water. If necessary, clean the adapter with the cleaning brush or a dry
cloth.
cleaning the epilator and attachments
Clean the epilating head after each wet use to ensure optimum
performance.
Always switch off the appliance before you clean it.
1 Switch off the appliance.
2 Remove the cap from the epilating head.
3 Press the release button (1) and remove the epilating head from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4 Remove loose hairs with the cleaning brush.