bonavi BNV-ST-0002 Gebrauchsanweisung Seite 34

Operational Instruction: Front Bar
1.
Attach the safety bar to the
seat by inserting the safety bar
into the pushchair fixture.
Warning: Ensure that the safety bar is fully engaged on both ends.
If the safety bar is not in use, use the safety plugs to prevent your child from injuries.
Swivel and Fix Front Wheel
Detach Front Wheels
Detach Rear Wheels
2.
Remove the safety bar by
pressing the release buttons on
both sides of the safety bar.
Push the locking knob inward or outward to lock and unlock the
front wheels. Locking the front wheels will result in no swiveling
motion for rough terrain. Unlocking the front wheels will result in
swiveling motion for quick and easy turns in the city.
Press down the quick release button and pull down the wheel.
When attaching the wheel again, ensure that it is fully engaged by
pulling it down slightly.
Press down the quick release button and pull down the wheel.
When attaching the wheel again, ensure that it is fully engaged by
pulling it outward slightly.
34
3.
The safety bar can also be
detached on one side only and
can be rotated accordingly.