Troubleshooting - Husqvarna CG 200 Bedienungsanweisung

2. Carry out a general inspection checking that no nuts
or bolts are loose.
To check after operation.
CAUTION: Dispose of the old oil as laid
down by the regulations in force.
1. Clean the product.
2. Lubricate the grease nipples on the wheelbase (1),
depth adjustment bearing (2) and on the roller
bearings (3).
3. See the engine manual for motor oil replacement .
4. To drain the engine oil, place a funnel at the drain
outlet (1).
Equipment troubleshooting
WARNING: Inspection and/or maintenance
should be carried out with the motor
switched off and the plug disconnected.
130 - 003 - 18.08.2017
To check the belt tension
1. Check the belt tension weekly.
2. Tight the lock nut (1) and nut (2) to set the belt
tension. Do not overtighten.

Troubleshooting

In the event of faulty operation refer to the tables below
to find a solution.
WARNING: Never set belts beyond original
tension.
11