Hand blender Use instructions
INSTRUCTION FOR USE
ASSEMBLY THE HAND BLENDER
Insert the stainless blending attachment on the motor unit (5), and screw.
To remove the blending attachment, unscrew (assembly mechanism 6) and separate the two components.
(Fig.1)
HOW TO USE THE HAND BLENDER
After assembly the hand blender and check it is correctly assembled, connect the cord supply (1) t the socket.
The stainless steel blade (4) allow to chop the ingredients into the container.
To get better results, it is necessary to give to the hand blender a rotating movement into the container.
At the same time it is necessary to keep the blade (4) completely immerse into the ingredients to avoid splash.
The hand blender is perfect for :
-mashed vegetables, milkshake ;
-sauces ;
-soup, mayonnaise.
CLEANING
Before cleaning the hand blender, unplug the cord supply from the socket.
The motor unit can be cleaned with a soft cloth and hot water.
Do never use thinners, abrasive detergent in general, detergent for plastic, glass or other, that could damage
the hand blender.
Do not put liquids into the hand blender.
Do not immerse the motor unit (5) into water or other liquids, do not rinse with water.
Clean the blending attachment with running water.
Be careful to the stainless blade that is very sharpen and cutting.
TECHNICAL DATA
Power: 200 W
Power supply : 220-240V ~ 50Hz
For any improvement reasons, Inside reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
9
EN