Packaging; Storage; Maintenance And Cleaning - Kollmorgen S700 series Handbuch

2.2.5 Packaging

The S700 packaging consists of recyclable cardboard with inserts.
Dimensions S701...S712: (HxWxD) 125x415x350 mm
Dimensions S724:
Dimensions S748/S772: (HxWxD) 390x600x400 mm
Labeling : nameplate outside at the box

2.2.6 Storage

Storage only in the manufacturer's original recyclable packaging
Max. stacking height S701...S724: 8 cartons
Max. stacking height S748...S772: 3 cartons
Storage temperature: -25 to +55°C, max. rate of change 20K/h, class 1K4 acc. to
EN61800-2
Storage humidity: 5 ... 95% relative humidity, no condensation, class 1K3 acc. to
EN61800-2
Storage duration: Less than 1 year without restriction.
More than 1 year: capacitors must be re-formed before setting up and operating the servo
amplifier. To do this, remove all electrical connections and apply single-phase 230V AC
for about 30 minutes to the terminals L1 / L2.

2.2.7 Maintenance and Cleaning

The servo amplifier does not require maintenance. Opening the servo amplifier voids the war-
ranty.
The inside of the unit can only be cleaned by the manufacturer. To clean the device exterior:
Casing: Clean with Isopropanol or similar cleaning solution.
Protective grill on fan: Clean with a dry brush.
Do not immerse or spray the servo amplifier.
(HxWxD) 155x415x350 mm
Kollmorgen | wiki-kollmorgen.eu | December 2015
S700 Safety Guide | 2 English
45