Electrical Safety - Ryobi RLM18X36H250F Übersetzung Der Original-Anleitung

■ Keep children out of the mowing area and
under the watchful care of a responsible
adult other than the operator, be alert and
turn the product off if a child enters the
area.
■ Use extra care when approaching blind
corners, shrubs, trees, or other objects
including overhanging shrubs, which may
block your view.

ELECTRICAL SAFETY

■ Power plugs must match the outlet. Never
modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified
matching outlets will reduce risk of electric
shock.
■ Avoid unintentional starting. Always check
that the switch is in off position before
plugging in the product to the power supply.
Do not carry a plugged-in product with your
finger on the switch.
■ Avoid body contact with earthed or
grounded surfaces,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
■ Do not expose the product to rain or wet
conditions. Water entering an appliance
will increase the risk of electric shock.
■ Electrical power should be supplied via
a residual current device (RCD) with a
tripping current of not more than 30 mA.
■ Before use, check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect
the cord from the supply immediately. Do
not touch the cord before disconnecting
the supply. Do not use the product if the
cord is damaged or worn.
■ If you need to use an extension cord,
ensure it is suitable for outdoor use and
has a current capacity rating sufficient to
supply your product. The extension cord
cable should be marked with either "H05
RN-F" or "H05 VV-F". Check it before every
use for damage, always uncoil it during
use because coiled cords can overheat.
Damaged extension cords should not be
repaired, they should be replaced with an
equivalent type.
■ Make sure the power cord is positioned so
that it cannot be damaged by the cutting
2 | English
■
■
■
■
plugs and
■
BATTERY TOOL USE AND CARE
such as pipes,
■
■
■
■
■
■
■
means and will not be stepped on, tripped
over or otherwise subjected to damage or
stress.
Never pick up or carry the product by the
electric cable.
Never pull by the power cord to disconnect
from the power supply.
Keep the power cord away from heat, oil
and sharp edges.
Make sure voltage is correct for the product.
A nameplate on the product indicates
the product's voltage. Never connect the
product to an AC voltage that differs from
this voltage.
Always ensure the cord from the handlebar
to the mower body is never trapped, pinched
or otherwise damaged during assembly or
handle folding. Never apply power to the
mower if this cable is damaged. Bring the
product to an authorised service centre for
professional repair.
Read, understand and always follow
the safety instructions which came with
your battery and charger. Failure to do
so may result in electric shock, fire or
other hazardous situations. Keep all the
instructions together in a safe place for
future reference.
Battery operated products do not have to be
plugged into an electrical outlet; therefore,
they are always in operating condition.
Remove the isolator key whenever you are
not operating the product.
Remove the battery pack before making
any adjustments, cleaning, or removing
material from the product.
Ensure the isolator key is removed before
inserting battery pack.
A battery pack must be recharged only with
the charger specified by the manufacturer.
Using a charger with an incompatible
battery pack may create a risk of fire. Use
battery pack only with charger listed.
Use only battery pack intended specifically
for the product. Use of any other battery
packs may result in a risk of fire, electric
shock, or injury to persons.
When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other