Programming Keys; Default Configuration - bürkert 8032 Bedienungsanleitung

5.3 Programming keys

To display the measured value and
the configuration (8 characters:
4 numeric et 4 alphanumeric charact.)
To modify the digit value (0...9) ;
To go back to the previous function.

5.4 Default Configuration

At the first powering up, the configuration of the controller 8032 is as follows:
Flow unit:
Output:
OLO:
OHI:
DEL:
Filter:
BGLO:
BGHI:
Extension board:
8032
l/s
hysteresis, inverted
0
0
0 s
2
0
0
not used
15
To indicate the status of the
switching output (red LED)
To validate a function;
To validate the entered data.
To select the character;
To go to the next function.