Connecting The Display; Detection Range - Dometic MagicWatch Montage- Und Bedienungsanleitung

Connecting the display

6 Connecting the display
The complete circuit diagram can be found in fig. 6.
No. Designation
1 Control electronics
2 Display
7

Detection range

See fig. 7
The detection range of the parking aid is divided into four zones:
• Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected.
• Zone 2
Nearly all objects are displayed in this zone.
• Zone 3
Virtually all objects are displayed in this zone, but some objects may come into
the blind spot of the sensors.
• Stop zone (4)
If there are objects in this zone, the parking aid emits a continuous tone warning
you to stop.
Virtually all objects are displayed in this zone, but some objects may come into
the blind spot of the sensors.
The distance at which the parking aid signals to stop is adjustable in stages.
Displaying fixed objects, such as a trailer hitch, can be suppressed.
6
MagicWatch Accessory
EN