Fittings - Siemens KD..N Serie Gebrauchsanleitung

Fittings

not on all models
Shelves
You can vary the shelves inside the
refrigerator compartment and the door
shelves as and when required: pull shelf
forwards, lower and swivel out to the side.
Raise the door shelf and remove.
Bottles and chiller
compartment
Fig. 4
Pull the base of the compartment
forwards, the flap opens.
The chiller compartment, Fig. 4/B, has
lower temperatures than the refrigerator
compartment. Temperatures below 0 °C
may occur.
Ideal for storing fish, meat and sausage.
Not suitable for salads, vegetables and
produce sensitive to cold.
Note
The partition in the bottle and chiller
compartment must not be moved or
taken out. Compartment and partition
may break.
Pull out drawer
Fig. 6
The drawer can be removed for adding
and removing food. Lift the drawer and
pull out. The drawer holder can be
adjusted.
Bottle shelf
Fig. 7
Bottles can be stored securely on the
bottle shelf.
Activated carbon filters
Fig. 1/15
This filter is used to suppress unpleasant
odours in the refrigerator compartment.
Bottle holder
Fig. 8
The bottle holder prevents bottles from
falling over when the door is opened and
closed.
Vegetable container with
temperature and humidity
regulator
Fig. 9
For long term storage:
Rotate regulator in a clockwise direction
to open the vent and drop the
temperature.
For short term storage:
Rotate regulator in an anti clockwise
direction to close the vent and increase
the temperature and humidity.
Ice maker
Fig. 0
1. Remove the ice cube tray, fill ¾ full
of water and re insert.
2. When the ice cubes are frozen, rotate
the knobs on the ice cube trays several
times to the right and release.
The ice cubes loosen and fall into
the storage container.
3. Remove ice cubes from the storage
container.
en
27