Machine Information; Technical Specifications - VONROC OT501DC Originalbetriebsanleitung

• Inspect the machine and the accessories before
each use. Do not use accessories which are
bent, cracked, or otherwise damaged. If the
machine or one of the accessories is dropped,
inspect the machine or the accessory for dama-
ge. If necessary, replace the accessory.
• Only use accessories that are recommended by
the manufacturer.
• Only use accessories that are suitable for the
application.
• Only use accessories with the correct dimensi-
ons.
• Do not use accessories that require liquid cool-
ants. Risk of electric shock.
• Make sure that the accessories are properly
mounted. Do not use adapters or other aids to
mount accessories with another spindle diame-
ter.
• Make sure that the maximum speed for the
accessory is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• Let the machine run at no load in a safe area
after mounting the accessories. If the machi-
ne vibrates strongly, immediately switch off
the machine, remove the mains plug from the
mains, and try to solve the problem.
• Make sure that the workpiece is properly sup-
ported or fixed.
• Wear safety goggles. Wear hearing protecti-
on. Wear a dust mask. If necessary, use other
protective means, such as safety gloves, safety
shoes, etc. Risk of personal injury.
• Keep bystanders away from the work area.
Make sure that all persons in the work area
wear protective equipment. Risk of personal
injury.
• Keep the mains cable away from the rotating
accessory. If the mains cable touches the rota-
ting accessory, your hands or arms may come
in contact with the accessory. Risk of personal
injury.
• Hold the machine by the insulated gripping
surfaces where the accessory may contact hid-
den wiring or the mains cable. If the accessory
contacts a 'live' wire, the exposed metal parts
of the machine can also become 'live'. Risk of
electric shock.
• Do not use the machine while carrying it at your
side. Risk of personal injury.
WWW.VONROC.COM
• Do not use the machine near flammable materi-
als. Risk of fire.
• Beware that the accessory continues to rotate
for a short period after switching off the machi-
ne. Do not attempt to bring the accessory to a
standstill yourself.
• Never put the machine down on a table or a
workbench before it has been switched off.
• Regularly clean the ventilation slots. Risk of
electric shock.

2. MACHINE INFORMATION

Intended use
Your multitool has been designed for light
sanding, sawing and scraping applications.

TECHNICAL SPECIFICATIONS

Model No.
Voltage
No-load speed
Weight
Sound pressure (Lpa)
Acoustic power (Lwa)
Uncertainty (K)
Vibration (sawing in steel)
Uncertainty (K)
Wear hearing protection.
Only use the following batteries of the VONROC
POWER 20V battery platform. Using any other batte-
ries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC POWER 20V battery
platform are interchangeable with all the VONROC
POWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
EN
OT501DC
20 V
5000-18000 /min
0.96 kg
81.8 dB(A)
92.8 dB(A)
3 dB(A)
4.657 m/s
2
1.5 m/s
2
5