Safety Instructions; Design And Layout Of The Device - Berker KNX Touch Control Bedienungs- Und Montageanleitung

z
KNX Touch Control
Order no.: 7574 01 01
Operating and assembly instructions

1 Safety instructions

Electrical equipment may only be installed and assembled by a qualified
electrician. Always follow the relevant accident prevention regulations.
Failure to comply with these installation instructions may result in dam-
age to the device, fire or other hazards.
When installing and laying cables, always comply with the applicable
regulations and standards for SELV electrical circuits.
The device must not be coated with paint. Cover device during renova-
tion work.
These instructions are an integral component of the product and must be
retained by the end user.

2 Design and layout of the device

(1)
Figure 1: Front view
(1) Touch-sensitive display area
23